DP=0, HABA=0, HAAR=0, IDIE=0, AVV=0, IDPU=0, DPS=0, BSV=0, AVVIE=0, MSE=0, BSEIE=0, BSVIE=0, OT=0, BSE=0, ASVIE=0, ID=0, ASV=0, DPIE=0
On-the-Go Status and Control Register
| VD | VBUS Discharge |
| VC | VBUS Charge |
| HAAR | Hardware Assist Auto-Reset 0 (0): Disabled. 1 (1): Enable automatic reset after connect on host port. |
| OT | OTG Termination 0 (0): Disable pull-down on DM 1 (1): Enable pull-down on DM |
| DP | Data Pulsing 0 (0): The pull-up on DP is not asserted 1 (1): The pull-up on DP is asserted for data pulsing during SRP |
| IDPU | ID Pull-Up 0 (0): Disable pull-up. ID input not sampled. 1 (1): Enable pull-up |
| RESERVED | Reserved |
| HABA | Hardware Assist B-Disconnect to A-connect 0 (0): Disabled. 1 (1): Enable automatic B-disconnect to A-connect sequence. |
| ID | USB ID 0 (0): A device 1 (1): B device |
| AVV | A VBus Valid 0 (0): VBus is below A VBus valid threshold 1 (1): VBus is above A VBus valid threshold |
| ASV | A Session Valid 0 (0): VBus is below A session valid threshold 1 (1): VBus is above A session valid threshold |
| BSV | B Session Valid 0 (0): VBus is below B session valid threshold 1 (1): VBus is above B session valid threshold |
| BSE | B Session End 0 (0): VBus is above B session end threshold 1 (1): VBus is below B session end threshold |
| MST | 1 Milli-Second timer Toggle |
| DPS | Data bus Pulsing Status 0 (0): No pulsing on port 1 (1): Pulsing detected on port |
| RESERVED | Reserved |
| IDIS | USB ID Interrupt Status |
| AVVIS | A VBUS Valid Interrupt Status |
| ASVIS | A Session Valid Interrupt Status |
| BSVIS | B Session Valid Interrupt Status |
| BSEIS | B Session End Interrupt Status |
| MSS | 1 Milli-Second timer interrupt Status |
| DPIS | Data Pulse interrupt Status |
| RESERVED | Reserved |
| IDIE | USB ID Interrupt Enable 0 (0): Disable 1 (1): Enable |
| AVVIE | A VBUS Valid Interrupt Enable 0 (0): Disable 1 (1): Enable |
| ASVIE | A Session Valid Interrupt Enable 0 (0): Disable 1 (1): Enable |
| BSVIE | B Session Valid Interrupt Enable 0 (0): Disable 1 (1): Enable |
| BSEIE | B Session End Interrupt Enable 0 (0): Disable 1 (1): Enable |
| MSE | 1 Milli-Second timer interrupt Enable 0 (0): Disable 1 (1): Enable |
| DPIE | Data Pulse Interrupt Enable 0 (0): Disable 1 (1): Enable |
| RESERVED | Reserved |